1.85mm Stainless Steel Coaxial Crystal Detector 0.01-67GHz 100mW 50Ohm
TWCD-1.85-67
Frequency 0.01-67GHz
Factory supply with fast delivery
Welcome to send inquiry
Coaxial detector Application with microwave broadband matching circuit, with high detection sensitivity, small standing wave coefficient, strong overload capacity, high output voltage, strong anti-interference ability, good stability, strong environmental adaptability characteristics. Suitable for communications, radar, electronic countermeasures, navigation, microwave measurement and other military or civilian electronic equipment for broadband microwave detector.
| Connector Material | Stainless Steel | |||||
| Frequency range | DC-67GHz | |||||
| Center Conductor | Gold Plated beryllium copper alloy | |||||
| Nominal impedance | 50Ω | |||||
| Temperature range | -20°C～+85°C | |||||
| Connector type | 1.85mm（J,K） | |||||
| Dimension | Ø8×24.25mm | |||||
| Model | Frequency | VSWR | Sensitivity (mV/mW) | Max input power(mW) | Connector | Output Polarity |
| TWCD-1.85-40 | 10MHz-40GHz | ＜1.5 | ≥220 | 100 | 1.85mm | Negative output polarity standard, if need Positive out put Plarity is also optional |
| TWCD-1.85-50 | 10MHz-50GHz | ＜1.8 | ||||
| TWCD-1.85-67 | 10MHz-67GHz | ＜2 | ||||
