20W 8 Way SMA 0.5-26.5GHz RF Splitter Power Divider 50ohm
Frequency 500-26500 MHz
Factory supply with fast delivery
Welcome to send inquiry
Factory service,Customized support
2Way/3way/4way/6way/8way/12way/16way/32way/64way optional
Wide frequency optional and up to 50GHz
Series connector optional SMA/N/BNC/2.92mm/2.4mm
A power divider divides an incoming signal into two (or more) output signals. In the ideal case, a power divider can be considered loss-less, but in practice there is always some power dissipation. Because it is a reciprocal network, a power combiner can also be used as a power combiner, where two (or more) ports are used to combine input signals into a single output.Theoretically, a power divider and a power combiner can be the exact same component, but in practice there may be different requirements for combiners and dividers, such as power handling, phase matching, port match and isolation.
SN | Parameters | Specifications |
1 | Frequency Range | 500~26500 MHz |
2 | Insertion Loss | ≤ 6.5 dB(Excluding theoretical loss 9.0 dB) |
3 | Input Port VSWR | Typ.1.40 / Max.1.70 |
4 | Output Port VSWR | Typ.1.25 / Max.1.60 |
5 | Isolation | Typ.22dB / Min.16dB |
6 | Amplitude Balance | ±0.6dB |
7 | Phase Balance | ±8° |
8 | Impedance | 50 Ohms |
9 | Input/Output Connectors | SMA-Female Stainless steel |
10 | Power Rating | Use as Splitter 20W; Use as Combiner 1W |
11 | Operation Temperature | -45℃ ~ +85℃ |
12 | Surface Finishing | Black paint |
13 | Outline Dimensions | 161.9*146*10(mm) |
14 | Weight | 700(g) |